Applications
Start from the measurement, not the part number
If the requirement is clear but the instrument is not, these pages are the shortest route. Each one states what has to be measured to achieve the result, maps every measurand to the instrument family that measures it, and lists the practical considerations that change the specification.
Electrical Parameter Testing
Verifying voltage, current, power, power factor and frequency of an electrical product against its specification.
- Voltage, current, power and power factor
- General electrical quantities at lower accuracy
- Current without breaking the circuit
Power Supply Testing
Measuring efficiency, no-load and standby consumption, regulation and power factor of adapters, chargers and supplies.
- Wide-range input power with fine low-end resolution
- Low-power and standby measurement
- Efficiency calculation and comparison
Motor & Drive Testing
Measuring input and output power, efficiency and electrical parameters on motors, drives and pumps.
- Input and output electrical power and efficiency
- Current measurement without breaking the circuit
- Winding and bearing temperature
Energy Efficiency Testing
Establishing and documenting the consumption of equipment, systems and production lines over defined operating cycles.
- Energy accumulation and power measurement
- Low-power and standby consumption
- Thermal output
Water Flow Measurement
Measuring potable, process, cooling and effluent water flow for billing, control and reporting.
- Clean conductive water, no pipe shutdown wanted
- Clean water where the line cannot be cut
- Open channels and partially filled pipes
Water Quality Monitoring
Measuring pH, conductivity, turbidity, dissolved oxygen and chlorine in process water and effluent.
- Continuous pH, ORP and conductivity
- Laboratory pH and conductivity measurement
- Online turbidity and suspended solids
Tank & Silo Level Monitoring
Continuous and point level measurement for inventory, batching and pump protection in vessels and silos.
- Continuous liquid level with vapour or foam
- Continuous level in clean, still headspace
- Liquids with a known and stable density
HVAC Commissioning
Air and water flow, temperature, differential pressure and humidity verification during commissioning and troubleshooting.
- Duct and terminal airflow
- Water flow
- Differential pressure and static pressure
Industrial Test Bench & Calibration
Building and maintaining test benches and calibration loops for instruments, components and assemblies.
- Sourcing electrical signals
- Sourcing pressure
- Sourcing temperature
Product Quality Inspection
Dimensional, mechanical and non-destructive verification of incoming, in-process and finished goods.
- External and internal dimensions
- Hardness and mechanical properties
- Coating thickness and surface finish
Describe the measurement and we will name the instrument
If you can state the quantity, the range and the conditions, we can identify the instrument family and the configuration that satisfies it.